Install WeedGuard Plus on a quiet, not too windy and rain-free day.
Place a heavy stone left and right on WeedGuard Plus when you start rolling out.
For example, pass a broom or a stick through the roll and unroll WeedGuard Plus slowly.
After laying out, pour some soil on the left and right side of WeedGuard Plus to prevent shifting.
Use WeedGuard Plus standard quality
Make sure that the spindle / core rod of your installation device is free.
Mount WeedGuard Plus in such a way that the roll can move freely and nothing obstructs its unrolling.
Adjust the castor wheels in such a way that they are parallel to the laying track and have no inclination or angle.
Ensure that no additional pressure is applied to the rolls.
Adjust the rolls in such a way that they run (without pressure) on the outer edges of the WeedGuard Plus.
Start rolling out.
While the soil layers are lifted to the left and right of WeedGuard Plus, WeedGuard Plus is laid out over the roller of your installation device.
Pull a few meters of WeedGuard Plus over the earth layer and lower the laying device to the height of the earth layer.
Make sure that WeedGuard Plus can unroll freely and that the earth scoops do not touch WeedGuard Plus.
Place some soil on the WeedGuard Plus to be laid out to fix it in place.
Start your tractor.
After several laid meters of WeedGuard Plus, check that WeedGuard Plus is laid correctly.
If cracks appear in the laid WeedGuard Plus, the rolls are not properly adjusted.
Re-adjust the rolls.